Roundup // our favorite cabinet hardware under $7

Cabinet hardware has often been referred to as the ‘jewel of the kitchen’ and I couldn’t agree more.  It’s pretty, functional, shiny, and usually one of the most complimented details in a kitchen.  But it doesn’t have to be expensive.  Cabinet hardware is one of the places we like to save money during a kitchen renovation.  In the 6 kitchens that Garrett and I have renovated, we’ve rarely spent more than $7 on a pull/knob/latch.

Here’s a look at five of my favorite classic and simple cabinet hardware options under $7.

sources Martha Stewart: 1 | 2 | 3 | 4 | 5

Beautiful, right?!   I’ve used most of these options more than once, and will use them again.  Kitchens shown are: Ravenna, #6daykitchenreno, Bryant, and Ravenna.

The only piece I hesitated to include was the latch pulls (item 1).  I love LOVE the look of these classic pulls on flush mount cabinets, but we’ve had a couple break.  I’m not sure if it was because of faulty manufacturing or a certain toddler who made a game out of twisting them.  But we’ve found it useful to have a couple of extra latches to replace any that break.

Garrett and I were in Seattle recently and stopped by the #6daykitchenreno for a visit with our friends, and my goodness how lovely the space looks!  Julia added a Skyline rug (which is the same rug I’m using in the master bedroom and nursery at the farmhouse) and I couldn’t stop staring at those brass pulls (item 2).  The pulls are gorgeous and will definitely be making a repeat appearance when I get my hands on another kitchen to renovate!

How about you, what’s your favorite cabinet hardware?

xoxo

-Cathy

p.s. Loved this article about building a home and NOT keeping up with the Jonses. That Kim has a good head on her shoulders!

p.p.s. Julia of Chris Loves Julia called me “seriously great” on her blog last week (!!!!). Did you see it?  She also posted a picture of our Dexter kitchen on her Instagram account.  She is such a great designer and blogger, I couldn’t be more flattered!

p.p.p.s. This old house tour is soooo good!

8 Comments

Dexter Kitchen: Campaign Hardware

THE DEXTER HOUSE

Well, I can finally say that I like the look of the campaign hardware as much as I had hoped.

The Grit and Polish - Dexter Kitchen Campaign Hardware

There are also more issues with the hardware than I expected (did you notice the booboo on the lower right drawer?), but I’ll get to that in a minute. First up, let’s talk about where we found this undeniably beautiful cabinet hardware and the installation process.

After searching high and low for recessed pulls for the kitchen drawers, I found the perfect campaign-style pulls on Etsy.  They’re handcrafted to by a group down in LA.

Screen Shot 2016-01-19 at 11.25.29 AM

Installation was tricky at best even for an experienced DIY-er (or maybe not even then…see aforementioned booboo).  We had 13 pulls to put in and it took three of us a solid 6 hours.

Since campaign hardware is recessed below the face of the drawer, you have to use a router for installation.  You need a template of the recessed area that will serve as a guide for the router blade.  Garrett made us one by tracing the back of the pull on a small piece of mdf and then cutting it out with a jigsaw.  Let me apologize in advance for the slew of bad iPhone pictures coming your way…

The Grit and Polish - Campaign Hardware Install template

The Grit and Polish - Campaign Hardware Install 2

We clamped the template to the drawer face, checking that it was tight and centered, so the pulls would end up in the middle of the drawer – obviously this is super important for function and form.  Next we drilled two holes for the screws before cutting out the recessed area with the router.  Routers are messy, so we had the shop vac on hand.

The Grit and Polish - Campaign Hardware Install 3 The Grit and Polish - Campaign Hardware Install 4 The Grit and Polish - Campaign Hardware Install 1The Grit and Polish - Campaign Hardware Install 6

We attached the pulls with screws from the inside of the drawer and voila!

The Grit and Polish - Campaign Hardware Install 7

Oh, but this bottom drawer.  The template wasn’t on securely when we began to router, so the template shifted, causing a large hole in the drawer face.  We filled the hole with putty, but haven’t gotten around to painting it.  Super frustrating!

The Grit and Polish - Campaign Hardware Install 8

So, what do I think about the campaign hardware as pulls?  They’re beautiful!  And unique.  Kind of like our shop vac operator 😉

On the flip side, the pulls are hard to use.  Since the recess isn’t very deep, it is difficult to grab the pull unless you have toddler-sized fingers.  Really this hardware is pretty much the opposite of child-safety latches: hard for adults to use but easy for toddlers.  And that is not a good thing in our home these days!

The Grit and Polish - Dexter Kitchen Campaign Hardware and Wilder

My other complaints are that these cabinet pulls were expensive – like $25 apiece – and they’re on the ‘very difficult’ side of the hardware-install scale, probably best left to a professional.  So while I love them, I probably wouldn’t use them again in a kitchen.  Maybe on a furniture piece or some rarely-used storage but not in a heavy use area like the kitchen.

What do you guys think about the look of the campaign hardware?  I’d love to hear it!

xoxo

-Cathy

p.s. did you see Chip and Joanna’s “barndominium” project?  I dig it!

p.p.s. Speaking of barns, check out this barn house.  I would have lightened the interiors up a bit, but I love the concept!  In fact, I’ve got a whole Pinterest board dedicated to barn houses, cause that’s just how I roll.

p.p.p.s. More “after” photos of the Dexter kitchen are coming next week!  But in the meantime, I’ve been posting a few peaks on my Instagram page.

Related Posts Plugin for WordPress, Blogger...
6 Comments